SHELVES
Frames are welded 32 mm x 2.5 mm roll formed
section fitted with moulded ABS Real Tuff shelves.
Shelf lengths from 600 mm to 1800 mm available
in increments of 150mm.
Width can be 300, 450, 525 or 600 mm deep.
POSTS
Posts are manufactured from 25 mm x 25 mm x
1.2 mm tube fitted with a Mantova bullet foot
allowing 32 mm of adjustment.
Standard post
heights are 1200 mm, 1800 mm or 2000 mm high.
FINISHES
Available in Zinc Lacquered, Polished Stainless
Steel, Hot Dip Galvanised and Powder Coat finishes
POST STYLE WITH WIRE GRID
SHELVES
Frames are welded 32 mm x 2.5 mm roll formed section with Wire Grid of
4 mm wires spaced on 8 mm cross supports spaced at 25 mm centres.
Shelf lengths from 600 mm to 1800 mm available in increments of 150mm.
Width can be 300, 375, 450, 525 or 600 mm deep.
POSTS
Posts are manufactured from 25 mm x 25 mm x 1.2 mm tube fitted with a
Mantova bullet foot allowing 32 mm of adjustment. Standard post
heights are 1200 mm, 1800 mm or 2000 mm high.
FINISHES
Available in Zinc Lacquered, Polished Stainless Steel, Hot Dip Galvanised
and Powder Coat finishes
PROVIDES :-
Depths of 750 and 900 mm
Lengths of 600 - 750 - 900 - 1050 - 1200 -
1350 and 1500 mm
SHELVES are available in Wire Grid -
Moulded ABS and Dunnage style tube
POSTS
Posts are manufactured from 25 mm
x 25 mm x 1.2 mm tube fitted with a
Mantova bullet foot allowing 32 mm
of adjustment. Standard post heights
are 1200 mm, 1800 mm or 2000 mm high.
FINISH - Zinc Lacquered, Hot Dip
Galvanised, Stainless Steel or Powder Coat
BRIDGE / CORNER CLIPS allow uninterrupted access where
corner or bridge assemblies are required.
POST CLAMPS allow adjoining assemblies to be locked together.
WIRE BACK / SIDE LEDGES attach to wire grid shelves with
clips to provide product stops.
SHELF DIVIDERS available for wire grid shelves.
PRODUCT STOPS of up to 3 sides available for ABS shelves.
TRAY SLIDES can be fitted between two wire grid shelves.
SIDE PANELS / REAR PANELS of wire grid mesh are available.
No.10 CAN MODULES will fit 450 mm deep frames to accomodate
up to 6 cans each.
VEGETABLE BASKETS made from zinc lacquered wire mesh drop
in to frames.
WINE MODULES either bulk or individual modules can be housed
in 300 mm or 450 mm shelf asseblies.
POST JOINERS will allow extension of post height on existing
installations.
DROP ON / DROP IN Shelves of solid S/S or Gal can be used in
place of ABS shelves on frames. May require additional braces for
support.
CASTORS may be fitted to the bottom of posts in place of feet. Also
rubber buffers are available.
DISC FEET may be used instead of standard bullet feet by using
threaded inserts in posts.
FOOT PAD may be used on standard bullet Foot.
